JBL AV1 - Manual (Page 67)

AV1
Setup
3-29
REAR L/R FULL, 30Hz TO 120Hz, THX 80Hz, NONE
Opens the REAR L/R SPEAKERS menu, which is used to a crossover
point for the audio output connectors labeled Rear L/R. When set
to FULL, the AV1 sends a full-range audio output signal to these
connectors. Otherwise, the AV1 activates a crossover point at the
selected setting. Choose the setting closest to the low-frequency
rating of associated speakers.
When set to NONE, the AV1 redirects rear channel signals to the
audio output connectors labeled Side L/R. If the CUSTOM SETUP
menu SIDE L/R parameter is also set to NONE, the AV1 redirects
surround channel signals to the audio output connectors labeled
Front L/R.
Note:
When the REAR L/R parameter is set to NONE:
• Dolby Digital Surround EX, THX Ultra2, THX Surround EX
and DTS-ES decoding are not available.
• The ASA parameter is not available.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
C
R SR RR
L SL RL M
SUB
40Hz 60Hz 60Hz
60Hz
40Hz 40Hz 60Hz 60Hz
REAR L/R SPEAKERS
FULL
30 Hz
40 Hz
50 Hz
60 Hz
70 Hz
80 Hz
80 Hz
90 Hz
100 Hz
110 Hz
120 Hz
CUSTOM SETUP
FRONT L/R
CENTER
SIDE L/R
REAR L/R
SUBWOOFER
ULTRA2 SUB
BGC
ASA 40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
SPEAKERS SETUP CUSTOM SETUP REAR L/R