Jura Capresso X7-S - Manual (Page 11)

11
15.11 Programming language
Ⅲ Press the key PROG.
Ⅲ By pressing the keys
or you can select the required
language.
Ⅲ To store, press the key PROG.
Ⅲ Press the key
in order to reach the next phase or the key EXIT
to quit the programming.
16. Care and maintenance
16.1 Fill water
Ⅲ : FILL WATER TANK
Ⅲ When this display lights up, no more drawing-off is possible. Fill
with water as described under Section 3.3.
The water tank should be rinsed out every day and filled with
fresh water.
If you use an automatic filling device, we recommend that you
rinse the water tank out regularly and fill it up with fresh water.
16.2 Installation of an automatic filling device
Please read the operating instructions of the automatic filling device.
16.3 Empty grounds container
The grounds container collects the coffee grounds.
Ⅲ
: EMPTY DRAWER
Ⅲ When this display lights up, no more draw-offs are possible and the
grounds container must be emptied.
Ⅲ Carefully remove the drip tray – there is water in it. Then re move
the grounds container (Fig. 4).
16.4 Empty drip tray
Ⅲ : EMPTY DRIP TRAY
Ⅲ When this display lights up, no more draw-offs are possible and the
drip tray must be emptied.
Ⅲ Carefully remove the drip tray – there is water in it (Fig. 4).
16.5 Grounds container missing
Ⅲ : DRAWER MISSING
Ⅲ When this display lights up, the grounds container has not been in-
serted properly or is missing.
16.6 Drip tray missing
Ⅲ
: DRIP TRAY MISSING
Ⅲ When this display lights up, the drip tray has not been inserted
properly.
+ -
+
16.7 Fill beans
Ⅲ : FILL COFFEE BEANS
Ⅲ Fill with beans as described in Chapter 3.4.
The display FILL COFFEE BEANS goes off after a draw-off of
coffee.
We recommend that you clean the bean container out with a
dry cloth from time to time before filling. For this, switch the
machine off.
16.8 Removing foreign objects
Ⅲ Switch your machine off with the ON/OFF operating switch.
Ⅲ Remove the plug from the power socket.
Ⅲ Open the hinged door on the reverse of the machine (Fig. 5).
Ⅲ Press the slides downwards (Fig. 6) and remove the bean con -
tainer.
Ⅲ Remove any beans with a vacuum cleaner.
Ⅲ Position the spanner (Fig. 7).
Ⅲ Turn the spanner in an anti-clockwise direction until the foreign
object becomes loose.
Ⅲ Remove remaining powder with a vacuum cleaner.
Ⅲ Now replace the bean container and pull the slides to the front
before closing the door (Fig. 6).
16.9 Clean machine
Ⅲ : CLEANING NECESSARY
After 220 draw-offs or 180 rinsings, the machine has to be cleaned.
You can continue to draw off coffee and hot water/steam. We recom-
mend that you clean the machine (Chapter 19) within the next few
days.
Carry out a cleaning (Chapter 19).
16.10 Machine scaled
Ⅲ : DECALCIFYING NECESSARY
The machine recognises the necessity of de-scaling. You can con tinue
to draw off coffee or hot water/steam. We recommend that you carry
out the de-scaling (Chapter 20) within the next few days.
16.11 Clean contacts
Ⅲ : EMPTY DRIP TRAY / CLEAN CONTACTS
The de-scaling residue in the area of the contacts must be removed.
Please proceed as follows:
Ⅲ Rinse the contact fasteners in trough (B) (Fig. 8) as well as the con-
tacts (A) with hot water and washing-up liquid. Then ad ditionally
clean the contact fasteners in trough (B) with a brush.
16.12 General cleaning instructions
Ⅲ Never use abrasive articles or corrosive chemicals to clean your
machine.
Ⅲ Wipe off the inside and outside of the casing with a soft, damp
cloth.
Ⅲ Clean the pivoting nozzle after every use.
E