Janome MEMORY CRAFT 4800 - Manual (Page 17)

16
3 2 1
4 5
1
2
Winding the Bobbin
• Set the spool
Lift up the spool pin and place the spool of thread on it
with the thread coming off the spool as shown.
Press the large spool holder firmly against the spool of
thread.
* The small spool holder is used with a small or narrow
spool of thread.
1 Spool pin
2 Ordinary spool
3 Large spool holder
4 Small spool holder
5 Small spool
• Removing the bobbin
Gently slide the hook cover plate release button to the
right and remove the cover plate.
Lift out the bobbin.
1 Hook cover plate release button
2 Hook cover plate