Jensen BT-390 - Manual (Page 14)

2. Installation
s Installing the Microphone
Before installing the microphone, take note of the following:
ƒ Make sure that the cable can reach from the microphone
to the speaker. If the cable is too short, relocate the
microphone. Do not lengthen the cable.
ƒ The supplied microphone is uni-directional. For best
results, place the microphone in front of the person
talking. It has a reception angle of 60 degrees, and is
most effective within a 60-cm radius.
Installing the Microphone
Find a suitable place for the microphone. Remove dust and
grease from the surface.
1. Remove the protective
cover from the Velcro and
press it firmly onto the
bottom of the microphone.
2. Remove the protective
cover from the other Velcro
pad and firmly press the
pad in place.
3. Attach the microphone.
10