Janome Memory Craft 6500 - Manual (Page 42)

40
Clasp stitch
Machine Setting
Pattern:
70 (Mode 2)
Thread tension:3-6
Presser foot:
Satin stitch foot F
Foot pressure: 2-3
You can bind the thick quilt layers together with the clasp
stitch.
Select the pattern 70 and press the memory button .
Press the locking stitch button.
Lower the presser foot and start sewing. The machine will
automatically stop after sewing one unit of the pattern.
Raise the presser foot and move the fabric to the next
position.
Applique
Machine Setting
Pattern:
33 (Mode 2)
Thread tension:1-4
Presser foot:
Satin stitch foot F
Foot pressure: 2
The open toe satin stitch foot F-2 can also be used.
Quilts can be more attractive and artistic by adding
applique.
Place an applique on the fabric and baste it in place or
use a fusible web to secure the applique in place.
Guide the applique fabric, so that the needle falls off the
edge of the applique when the needle swings to the right.
1 Applique
2 Edge of the Applique
3 Open Toe Satin Stitch Foot
1
3
2