Jasco 45245 - Manual (Page 13)

13
Blank monitor
1. Make sure receiver or monitor is switched ON, and
the correct video input has been selected.
2. Ensure AC adapters are completely plugged into
the socket and the camera and/or receiver’s power
indication light is on.
Interference on camera picture
1. Make sure each camera (transmitter) is within
range, and that no large obstructions are blocking the
signal.
2. Try repositioning the camera, monitor (receiver) or
both to improve the reception quality.
3. If a camera is positioned close to the monitor, point
antenna away from the receiver.
4. Reposition other nearby equipment transmitting on
the 900MHz frequency.
5. Adjust the antenna for the camera, monitor or both
to obtain best image.