Jabra Cruiser - Manual (Page 16)

13
english
Jabra CrUISEr
CALLER ID
During an incoming call Jabra CrUISEr will access the phone book
in the mobile phone and announce the name of the caller . If your
phone does not support phonebook access profile (PbaP) it will
announce the number of the caller .
SOFTWARE UPGRADE
It is possible to upgrade the speakerphone software .
Go to www .jabra .com and follow the instructions .
tRoUBLesHootInG & FAQ
I hear crackling noises
- bluetooth is a radio technology, which means it is sensitive to
objects between the speakerphone and the connected device .
It is designed for the speakerphone and the connected device
to be used within 33 feet (10 meters) of each other, with no
major objects in the way (walls, etc .) .
I cannot hear anything in my speakerphone
- Increase the volume in the speakerphone .
- Ensure that the speakerphone is paired to a device that is playing .
- Make sure your phone is connected to the speakerphone by
tapping the answer/End button .
I am having pairing problems
- You may have deleted your speakerphone pairing connection
in your mobile phone . Follow the pairing instructions .
I want to reset the pairing list in my speakerphone
The speakerphone registers a list of up to 7 mobile phones .
To remove the list, press and hold the answer/End button, Volume
up button and FM button at the same time . a beep indicates the
list was removed from the speakerphone memory . The next time
you power on, the speakerphone will go into pairing mode as the
first time you powered your new Jabra CrUISEr on .