Jaguar XK JJM 18 02 30 701 - Manual (Page 149)

Stability Control
166
L
USING STABILITY CONTROL
Switching between DSC and Trac DSC
- All vehicles
• Press and hold the DSC switch for
less than three seconds.
• The message centre will temporarily
display either Trac DSC or DSC ON.
• The warning light on the instrument
cluster will illuminate while Trac DSC
is selected.
• The warning light will flash when DSC
or Trac DSC is active.
Note: If cruise control is engaged it will
automatically disengage if stability control
activates.
Switching between DSC OFF and ON -
Normally aspirated engines only
Switching DSC OFF:
• Press and hold the DSC switch for
more than three seconds.
• The message centre will temporarily
display DSC OFF and a warning
chime will sound.
• The warning light on the instrument
cluster will illuminate.
Switching DSC ON:
If DSC is OFF:
• Press and release the DSC switch.
• The DSC system will switch on, the
message centre will temporarily
display DSC ON.
• The warning light on the instrument
cluster will be extinguished.
Stability control indicator - All vehicles
A system malfunction is indicated by the
message DSC NOT AVAILABLE in the
message centre and the amber priority
warning light. The instrument cluster
warning light will also be lit.
It is safe to drive the vehicle but the DSC
system will not activate under wheel spin
or slide conditions. You should seek
qualified assistance as soon as possible.
Computer active technology system
(CATS)
If the message centre displays the
message CATS SYSTEM FAULT, a fault
has been detected in the adaptive
damping system. Seek qualified
assistance as soon as possible.
JAG0262L