Rear panel – JVC VR-N900U User Manual

Page 16

Advertising
background image

Getting Started

8

Rear Panel

1

[POWER] switch

Switches the power on or off.

Note

• Be sure to press and hold down the [OPERATE] button on

the front panel to shut down the system before switching

off the power supply.

2

[AC IN (120-240V)

] power input terminal

Connect to an AC120-240V outlet using the power cable supplied.

3

[RESET]

Resets the system. Press this button when a malfunction occurs.

CAUTION

• Do not press this button in normal circumstances.

4

[AUDIO OUT] terminal (RCA)

Outputs live sound in live viewing mode.

Outputs recorded sound in playback mode.

Note

• Sound will not output in the following cases:

- When playing back still images, when running searches

other than X1, and when playing back frame-by-frame.

- When a menu or search menu is displayed during

playback.

5

[VGA OUT] terminal

Outputs live images, playback images and the menu windows.

6

[SERIAL] terminal

Used to connect the communication control terminals on a

mouse (sold separately), flash memories (sold separately), UPS

(sold separately) and additional disk drives (sold separately).

7

Connector cover

CAUTION

• Do not remove the connector cover.

8

[LAN 2] connection interface (Intranet network)

For connection to the remote PC network using a LAN cable.

9

[CAMERA CONTROL] terminal

Lets you control the analog cameras.

10

[LAN 1] connection interface (Camera network)

For connection to the IP camera (sold separately) network

using a LAN cable.

11

Signal input/output terminals

For operating the VR-N900U using external alarm signals or

signals received from external devices, or for operating

external devices by outputting signals.

*Diameter of applicable cables: AWG22 to AWG28

12

[VIDEO IN] camera image signal input

terminals 1 to 4

Connect to the video output terminal of the analog camera

(sold separately).

13

[AUDIO IN] terminals 1 & 2 (RCA)

Connect to the audio output terminal of the device from

which audio signals are to be recorded.

CAUTION

• All Audio, Video, and LAN-connectors are not to be

directly connected to Cable Distribution Systems (outdoor

units or between buildings.)

1

2

13

12

11

10

9

8

6

5

7

4

3

Advertising