JVC SIRIUS KT-SR1000 - Manual (Page 30)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
30
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Stream:
Press CHANNEL
5 / ∞ (or CH + / –) to select a
stream on the stream list shown on the screen, press
SELECT.
Program Alert:
Press CHANNEL
5 / ∞ (or CH + / –) to select either
“Program Alert On” or “Program Alert Off”, press
SELECT.
Auto Shutdown
You can make your JVC PnP shut off automatically if
no operation is done for about one hour.
A beep tone sounds just one minute before your JVC
PnP shuts off, and the “Cancel Auto Shutdown”
screen will be shown (see note below).
To activate (or deactivate) Auto Shutdown
Press CHANNEL
5 / ∞ (or CH + / –) to select
“Enabled” (or “Disabled”), then press SELECT.
Note: When the “Cancel Auto Shutdown” screen
is shown on the display, pressing SELECT will
temporarily cancels Auto Shutdown.
Sleep Mode
You can specify the time until your JVC PnP shuts
off—“Sleep Off”, “15 minutes”, “30 minutes”, “45
minutes” and “60 minutes”.
Press CHANNEL
5 / ∞ (or CH + / –) to select the
time, then press SELECT.
Your JVC PnP will now turn off after the selected
time has passed.
• If “Sleep Off” is selected, Sleep Mode is canceled.
- Factory Default
You can reset the following items to the default
settings.
Press CHANNEL
5 / ∞ (or CH + / –) to select “Yes”
(to reset) or “No” (to cancel the reset), then press
SELECT.
KT-SR1000_15-35.p65 03.12.15, 19:11 30