Jaguar 2002MY NAS Audio System JJM 18 03 24/22 - Manual (Page 19)

2-12 Controls and operation
Cassette tape player operation
The audio display will indicate which
function has been selected.
Messages include:
When loaded, a tape immediately plays
and after playing one side, auto-reverses
and plays the other. Equalisation of
non-ferric tapes is automatically adjusted.
Eject and tape-in indicator
When a cassette is inserted, the aperture
door closes and a cassette icon is
displayed. Press to eject the cassette.
TAPE button
If you are playing the radio or
CD changer, pressing TAPE will play any
cassette in the player. This function can
also be controlled by a button on the
steering wheel (see page 2-1).
Change tape side
While playing a cassette, press the
TAPE button to change to the other side
of the tape. This function can also be
controlled by a button on the steering
wheel (see page 2-1).
Fast forward and rewind
These controls have two functions,
to seek a track, and tape fast forward or
rewind. Momentarily pressing the right-
hand button will locate the beginning of
the next track. Similarly pressing the left-
hand button, will return to the beginning
of the current track. Pressing and holding
the appropriate button for two seconds
will activate continuous fast forward or
rewind of the tape. This can be cancelled
by pressing either button again.
Dolby B
When using a cassette with a ‘Dolby’
recording, the noise reduction system can
be selected by pressing the DOLBY on/off
button. DOLBY will be displayed to
indicate the system is active.
Dolby noise reduction system is
manufactured under licence from
Dolby Laboratories Licensing
Corporation. ‘Dolby’ and the double-D
symbol are trade-marks of
Dolby Licensing Corp.
SIDE1 UP1 Locate beginning of next
track on side 1.
SIDE1 DN1 Locate beginning of track
being played on side 1.
SIDE1 REW Rewind.
SIDE1 FF Fast forward.
LOADING Loading tape.
TAPE EJECT Ejecting tape.
TAPE CLEAN Tape mechanism
requires cleaning.