Jeff Rowland Design Group Model 2 - Manual (Page 14)

Performance Specifications
Output Power
Continuous RMS watts
@ 8 ohms
75 watts
@ 4 ohms 150 watts
Power Bandwidth 0.1 Hz to 160 kHz, -3 dB
Slew Rate 80 volts per microsecond
THD and Noise Less than 0.05% at rated power
Damping Factor Greater than 100, 20 Hz to 20 kHz, 8 ohms
Output Current 20 amps continuous, 35 amps peak
Overall Gain
& Sensitivity User selectable on rear panel
(1 watt, 8 ohms) 26 dB or 32 dB; 141 mV or 71 mV
Input Impedance User selectable on rear panel
Unbalanced 36k or 600 ohms
Balanced 36k or 600 ohms
Common Mode
Rejection Ratio Greater than 60 dB, 20 Hz to 20 kHz
Power Consumption 25 watts standby; 175 watts operating, idle;
400 watts maximum
Inputs User selectable on rear panel
Unbalanced With supplied XLR/RCA adapter
Balanced 2 XLR connectors
Outputs 1 pair binding posts per channel
Dimensions 17.5 in. W x 14.25 in. D x 5.25 in. H
44.5 cm W x 36.2 cm D x 13.3 cm H
Shipping Dimensions 24 in. W x 20 in. D x 12 in. H
61 cm W x 50.8 cm D x 30.5 cm H
Weight 47 lbs. (21.5 kg)
Shipping Weight 75 lbs. (34.0 kg)
Because Jeff Rowland Design Group is constantly analyzing new
design improvements, we reserve the right to change or modify product
specifications without notice or obligation.
Operation / Specifications