JBL HT18 - Manual (Page 8)

All features and specifications are subject to
change without notice.
† The maximum recommended amplifier power
rating will ensure proper system headroom to
allow for occasional peaks. We do not recom-
mend sustained operation at these maximum
power levels.
* Dolby is a trademark of Dolby Laboratories.
DTS is a registered trademark of
Digital Theater Systems, Inc.
HTI6
Frequency Response
38Hz – 20kHz (–10dB)
Recommended Maximum
Amplifier Power
†
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,500Hz
Woofer
6-1/2" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1" Pure-titanium dome,
w/Elliptical Oblate Spheroidal™
(EOS) waveguide, and swivel mount
Plate Size (W x H)
216 x 279mm (8-1/2" x 11")
Mounting Cutout Size (W x H)
181 x 246mm (7-1/8" x 9-11/16")
Mounting Depth
98mm (3-7/8")
Weight per Speaker
5kg (11 lb)
HTI8
Frequency Response
30Hz – 20kHz (–10dB)
Recommended Maximum
Amplifier Power
†
120 watts
Impedance
8 ohms nominal
Sensitivity
90dB (2.83V/1m)
Crossover Frequency
2,500Hz
Woofer
8" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1" Pure-titanium dome,
w/Elliptical Oblate Spheroidal™
(EOS) waveguide, and swivel mount
Plate Size (W x H)
257 x 333mm (10-1/8" x 13-1/8")
Mounting Cutout Size (W x H)
225 x 300mm (8-7/8" x 11-13/16")
Mounting Depth
102mm (4")
Weight per Speaker
6.1kg (13.5 lb)
HTI55
Frequency Response
40Hz – 20kHz (–10dB)
Recommended Maximum
Amplifier Power
†
120 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
Dual 5" polymer-coated aluminum
cone w/rubber surround
Tweeter
1" Pure-titanium dome,
w/Elliptical Oblate Spheroidal™
(EOS) waveguide, and swivel mount
Plate Size
391 x 191mm (15-3/8" x 7-1/2")
Mounting Cutout Size
56 x 152mm (14" x 6"3)
Mounting Depth
98mm (3-7/8")
Weight per Speaker
2.6kg (5.7 lb)
HTI6C
Frequency Response
40Hz – 20kHz (–10dB)
Recommended Maximum
Amplifier Power
†
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
6-1/2" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1" Pure-titanium dome,
w/swivel mount
Plate Size (Diameter)
233mm (9-3/16")
Mounting Cutout Size
(Diameter)
200mm (7-7/8")
Mounting Depth
108mm (4-1/4")
Weight per Speaker
4.5kg (10 lb)
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility that the products described in this
owner’s manual are in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Gary Mardell
Harman Consumer Group International
Chateau-du-Loir, France 9/04
DESIGN GOAL: Combine the superior performance of traditional
JBL loudspeakers with the convenience of in-wall installation.
TWEETER TYPE: Pure-titanium dome with EOS ™ waveguide,
and swivel mount
WOOFER TYPE: Polymer-coated aluminum cone with rubber surround
CROSSOVER NETWORK: Straight-Line Signal Path ™ (SSP)
PROFESSIONAL REFERENCE: Studio Monitor
OWNER’S GUIDE
PRODUCT LINE:
MODELS:
HTI6, HTI8, HTI55 and HTI6C
JBL Home Theater In-Wall Series
SPECIFICATIONS
© 2004 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International
Industries, Incorporated.
Part No.406-000-05033
PRO SOUND
COMES HOME ™
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
Europe: 2. Route de Tours, 72500 Château du Loir, France
www.jbl.com
NOTE: For new-construction applications, be sure
to purchase the correct rough-in frame kit.
English