John Lewis JLBIOS663 - Manual (Page 25)

25
Replacing the Oven Light
Disconnect the appliance
If the oven bulb needs replacing, it must comply
with the following specifications:
- Electric power: 15 W/25 W,
- Electric rate: 230 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Service
Force Centre.
To replace the faulty bulb:
1. Ensure the oven is isolated from the electrical
supply.
2. Push in and turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the
new one.
4. Refit the glass cover and restore the electrical
supply.
)
Grill heating Element
This model has been fitted with a hinged grill ele-
ment to make the roof of the oven especially easy
to clean.
Before proceeding ensure the oven
is cool and disconnected from the
electricity supply.
Proceed as follows:
1. Undo the screw fastening the grill element.
When carrying out this operation for the first
time, we recommend using a screwdriver.
2. Then gently pull the grill downwards to allow
access to the oven roof.
3. Clean the oven roof with a suitable cleaner
and wipe dry before returning the hinged grill
element to its original position.
4. Gently push up the grill element into place
and firmly screw into place the holding nut.
Ensure the holding nut on the grill
element is properly tightened so that
it does not fall down when in use.
)