Jwin JX-CD7160 - Manual (Page 10)

Mini Portable Stereo Audio System V10M10_IM_EN_04102007
www.jWIN.com - 9 -
OPERATIONAL INSTRUCTIONS
Loading a CD into the Player
1. Press the OPEN button on the front of the
unit to open the CD compartment.
2.
Place a CD into the compartment with the
label facing up and close the CD door.
OPEN button
3. Set the FUNCTION switch to CD.
4.
The total number of tracks on the CD will appear on the LCD display.
5. When the FUNCTION switch is in the CD position and there is no disc inside, the LCD
display will show “00” and remain in the STOP mode.
Listening to CDs
1. In the STOP mode, press the PLAY/PAUSE button to begin playback.
The first track on the CD will play. The PLAY indicator and the
number of the track playing will appear on the LCD display.
2. Press
the PLAY/PAUSE button once to pause the playback. The PLAY indicator will flash
while the music is paused.
3. Press
the PLAY/PAUSE button again to resume playback from the same position where it
was stopped.
4. Press the STOP button stop playback.
5. Press the POWER button once to turn off the unit. The LCD light will go off and the
STANDBY/MUTE LED indicator will light.
Track number
Track number