Janome MEMORY CRAFT 9700 - Manual (Page 82)

80
SET
A Z
Edit
1 2 3 4
Ready to Sew
2
P
Jog
224 255
ST
2
1
Bamboo
Blond Beige 213 Umber 237
24 min 13 Colors
76x62mm
A(F):126x110mm
Size
SET SET
SET
A Z
Edit
1 2 3 4
5 6 7 8
Designs
Hoop Size A(F): 126 X 110mm
1
4
2 3
5
6
Built-in Designs
Press the Built-in Design key.
Press the pattern selection key to select the desired
pattern.
The embroidery screen will appear.
1 Color/Part key
The thread color and the sewing order of each section
of embroidery is indicated on the key.
The machine will automatically stop sewing when one
part of the embroidery design is finished.
Change the thread and start sewing again. The color
of the key will darken after you finish sewing that part
of the embroidery design.
Sewing the specific color/part by skipping
You can sew only the specific part of the design by
skipping the parts before it.
Press the color/part key previous to the part you wish
to start sewing, and the skipped parts will darken.
2 Return key
Press this key to return to the pattern selection
window.
3 Next page Key
The next page key will be displayed when there are
more design parts to be displayed. Press this key to
view the rest of the embroidery design parts.
4 Jog Keys
Adjust the hoop position with the jog keys so that the
needle drop position comes right above the center of
the reference lines on the fabric.
5 Needle drop position
6 Centerlines