Janome 1100D - Manual (Page 37)

36
FLATLOCK 2
Select 6 and set up the machine.
The needle and lower looper threads form a stitch that
can be pulled flat.
Fold the fabric with the wrong side together and stitch
along the folded edge. After stitching, open and pull the
fabric flat.
Common Uses
• Garment construction on undergarments.
• Hemming technique.
Thread in the following sequence:
1 Green thread path for lower looper
2 Yellow-1 thread path for L needle
(See pages 44-45 for detailed threading route.)
NOTE:
Adjust the stitch width by turning the cutting width dial
as necessary (see page 26).
OVERCAST 2
Select 5 and set up the machine.
The needle and lower looper threads form an edge
finish that is lightweight and flat.
Common Uses
• Finish an open seam edge on lightweight fabrics.
Thread in the following sequence:
1 Green thread path for lower looper
2 Yellow-1 thread path for L needle
(See pages 44-45 for detailed threading route.)
5
6
NA 6 1.0 2.0
NO. DF SL
L R
1 5 1.0 2.0
NO. DF SL
L R