Juniper Networks IDP SERIES IDP250 - Manual (Page 57)

Figure 16: NSM Add Device Wizard: Add Device Confirmation
8. Click Next to import the configuration from the IDP Series device. Upon success, NSM
displays the following message:
Figure 17: NSM Add Device Wizard: Configuration Import Confirmation
9. Click Finish .
For IDP OS 4.1 and later devices, NSM next runs a job to update the IDP device with
the Recommended IDP security policy. The Job Information dialog box shows the
status of the Update Device job.
10. After the job is complete, double-click the device in Device Manager to view the
imported configuration.
To check the device configuration status, mouse over the device and verify that the
device status displays
Managed .
45 Copyright © 2012, Juniper Networks, Inc.
Chapter 7: Adding the IDP Appliance to NSM