JVC CA-D672TR - Manual (Page 39)

35
English
5.
Select the source you want to listen to.
To use the Tuner as the source:
1. Adjust the MULTI CONTROL stick left or right until “TUNER” blinks in the display.
2. Adjust the MULTI CONTROL stick up or down to select the preset channel you want to
listen to. (possible only after presetting stations.)
3. Press the SET button.
To use a CD as the source:
1. Adjust the MULTI CONTROL stick left or right until “- CD - - -” blinks in the display.
2. Adjust the MULTI CONTROL stick up or down to select the disc tray containing the CD
you want to play.
3. Press the SET button.
If you press the SET button without selecting a disc, the last disc played by the CA-D672TR
will be used.
4. Adjust the MULTI CONTROL stick up or down to the select the starting track of the CD.
You can only select up to 20 tracks.
5. Press the SET button.
If you press the SET button without selecting a track, playback will start from the first track
on the CD.
To use a Cassette Deck as the source:
1. Adjust the MULTI CONTROL stick left or right until “TAPE” blinks in the display.
2. Press the SET button.
To use another source:
Use this to select a radio station that has not been preset.
1. Adjust the MULTI CONTROL stick left or right until “- - - -” blinks in the display.
2. Press the SET button.
The last source used is selected.
SOURCE DAILY
CH
SET
SET
SET
SOURCE DAILY
SOURCE DAILY
SOURCE DAILY
SOURCE DAILY
SOURCE DAILY
SET
SET
SOURCE DAILY
CH
MHz
EN01-42.CA-D672TR[E]/F 05.3.24, 9:31 PM 35