Juniper Networks ERX-1410 - Manual (Page 121)

ERX Edge Routers
A-3
Telecommunications
Certification • ACA TS 016-1997
• CTR13 – Commission Decision of 9
July 1997 on a common technical
regulation for attachment
requirements for terminal
equipment interface for connection
to 2048 kbit/s digital structured
ONP leased lines: 97/521/EC – OJ
No. L215 Vol. 40, August 1997
• CTR24 – Commission Decision of 9
September 1997 on a common
technical regulation for attachment
requirements for terminal
equipment interface for connection
to 34 Mbit/s digital unstructured and
structured leased lines: 97/639/EC
– OJ No. L271 Vol. 40, 3 October
1997
• FCC PART 68
• IECS-003 Issue 3 Class A
• PD7024 – Essential requirements
for terminal equipment intended for
connection to unstructured digital
leased circuits of the public
telecommunications network using
a CCITT recommendation G,703
interface at a rate of 2048 kbit/s
with a 75 ohm unbalanced
presentation, 1994
• RTTE Directive (1999/5/EEC)
a.If the voltage rises above -40 VDC, the system will power off. The system will not power on again until the input
voltage reaches -43 +/- 0.5 VDC.
Table A-1 ERX specifications (continued)
ERX-1400 Series ERX-700 Series