JVC RX-668RBK - Manual (Page 26)

23
English
Using the On-Screen Menus
You can use the Menus on the TV screen to control the receiver.
To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 6), and set the
TV’s input mode to the proper position to which the receiver is connected.
•
When the TV’s input mode is incorrect; for example, a different video input or TV tuner mode is selected, you
cannot show the Menus on the TV screen.
On-Screen Operation buttons (on the remote control)
Activating the DSP Modes (Also see page 21)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
ON SCREEN operations.
2. Press any one of
% / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press
% / fi to move
to “MODE.”
4. Press
@ / # to select the
DSP mode you want to
use.
5. When you finish, press ON SCREEN EXIT.
The menu disappears from the TV.
Adjusting the Front Speaker Output Balance
(Also see page 10)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
ON SCREEN operations.
2. Press any one of
% / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press
% / fi to move
to “SOUND
CONTROL,” then press
@ / #.
The SOUND CONTROL menu appears.
4. Press
% / fi to move
to “BAL.” (Balance).
5. Press
@ / # to adjust
the balance.
6. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
ON SCREEN
SLEEP ONE TOUCH OPERATION TV/VIDEO
3 2 1
6 5 4
9 8 7/P
+10 0
TV SOUN D
RE C P AUS E
TEXT DISPLAY
RM-SR668RU REMOTE CONTROL
MUTING DVD M ULT I
/I
+ PTY
PTY SEARCH
PTY –
PH ON O
FM/A M
DVD
CD
VCR
VOLUME VCR CH TV VOL. TV CH
10
SET EXIT CD-DISC
SOUND CONTROL TV VCR AUDIO
SURROUND TEST DELAY
EFFECT – CENTER +
– REAR•L +
ENTER
RETURN
MENU
– REAR•R + 100+
8 DISP LAY
ON SCREEN
2
6 4
8
SET EXIT
TEST
EFFECT – CENTER +
– REAR•L +
TAPE/M D
Selecting the Source to Play (Also see page 8)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as
% / fi / @ / # for
ON SCREEN operations.
2. Press any one of
% / fi / @ / #.
The MAIN MENU appears on the TV.
Notes:
• If your TV is not of the PAL color system, the TV screen will be
distorted.
• The on-screen display will disappear if no operation is done for
about 1 minute.
3. Press
% / fi to move
to “SOURCE.”
4. Press
@ / # to select the source.
5. When you finish, press ON SCREEN EXIT.
The menu disappears from the TV.
Shows the buttons you can use on the current
menu.
In this case, use
% / fi to move up and down,
and @ / # to select, adjust or set the item.
SOUND CONTROL
SURROUND LEVEL
TONE CONTROL
BAL.:R-21
BASS BOOST :OFF
INPUT ATT :NORMAL
NEXT PAGE
:OPERATE
EN23_36.RX-668R[E]/2 99.1.28, 1:11 PM 23