JVC LVT2101-001A - Manual (Page 32)

32
The unit’s Audio Output Specifications
HDMI OUT
PCM PCM DTS Primary
Source Stereo Multi-Ch* 3 Re-encode* 6 Pass-Thru * 1, * 2, * 3
Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch PCM 7.1ch DTS Dolby Digital Plus
Dolby TrueHD PCM 2ch PCM 7.1ch DTS Dolby TrueHD
DTS PCM 2ch PCM 5.1ch DTS DTS
DTS-HD PCM 2ch PCM 7.1ch DTS DTS-HD
Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS PCM 5.1ch
Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS PCM 7.1ch* 4
SPDIF (DIGITAL AUDIO OUT)* 5
PCM DTS Primary
Source Stereo Re-encode* 3, * 6 Pass-Thru* 1
Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital
Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital
DTS PCM 2ch PCM 2ch DTS DTS
DTS-HD PCM 2ch PCM 2ch DTS DTS
Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 7.1ch PCM 2ch PCM 2ch DTS PCM 2ch
Analog Output
Stereo
Notes:
*1 The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI]
option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and
secondary audio.)
*2 This player automatically selects the HDMI audio according to the decoding capability of the connected
HDMI device even though [HDMI] option is set to [Primary Pass-Thru].
*3 The [PCM Multi-CH]/[Primary Pass-Thru] setting of the [HDMI] option and [DTS Re-Encode] setting of the
[SPDIF] option cannot be set together. If you set the [HDMI] option to [PCM Multi-CH] or [Primary Pass-
Thru], the [SPDIF] option is set to [PCM Stereo] automatically. Also, if you set the [SPDIF] option to [DTS
Re-Encode], the [HDMI] option is set to [PCM Stereo] automatically.
*4 The LPCM audio recorded at 192kHz sampling frequency will be outputted as stereo sound.
*5 On the PCM audio output, the sampling frequency of SPDIF (DIGITAL AUDIO OUT) is limited to 96 kHz.
*6 If the [HDMI] or [SPDIF] option is set to [DTS Re-Encode], the audio output is limited to 48 kHz and 5.1
ch. If the [HDMI] or [SPDIF] option is set to [DTS Re-Encode], the DTS Re-Encode audio is outputted for
BD-ROM discs, and the original audio is outputted for the other discs (like [Primary Pass-Thru]).
• If [HDMI] option is set to [PCM Multi-CH] and [SPDIF] option is set to [Primary Pass-Thru] when the unit
plays back Dolby Digital Plus or TrueHD audio, SPDIF (DIGITAL AUDIO OUT) jack is limited to “PCM 2ch”.
• If the HDMI connection is version 1.3 and Dolby Digital Plus/Dolby TrueHD is outputted from HDMI OUT
jack, SPDIF (DIGITAL AUDIO OUT) jack is limited to “PCM 2ch” (When the HDMI and SPDIF are
connected simultaneously).
• The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD
while playback.
• The Dolby TrueHD audio recorded on some Blu-ray discs consists of Dolby Digital and TrueHD audio.
Dolby Digital audio is output through DIGITAL AUDIO OUT jacks and "DD" displays on the screen if
TrueHD audio is not output (for example, when [HDMI] is set to [PCM Stereo] and [SPDIF] is set to
[Primary Pass-Thru]).
• The analog 2 channel output connection is always output PCM 2CH sound.
Jack/
Setting
Jack/
Setting
BD320-JN_BUSAJJK_OM_ENG 8/31/09 12:16 PM Page 32