JVC SA-DV6000 - Manual (Page 32)

48
Caution
●
When setting the NETWORK P
ACK SETUP
screen (NETWORK SETUP
, POR
T
SETUP
, VTR CONTROL
or ENCODE P
ARAM-
ETERS) and the same menu screen is displayed on the LCD screen of BR-DV6000, values set in the NETWORK P
ACK SETUP
screen will not appear instantly on menu screen of the LCD screen of BR-DV6000. The values set in the NETWORK P
ACK SETUP
screen will appear after the menu screen of BR-DV6000 is closed once and
reopened.
●
During VTR control, noise may be heard from the speakers. However
, this is not a malfunction. If the noise becomes irritating,
open the “Sound & Multimedia” property from the Windows Control Panel and set the sound of “W
indows Explorer Start Naviga-
tion” of “Sound Events” to of
f.
* For setting details, see Windows’
Help.
●
Check to make sure that REMOTE SEL NET in the REMOTE [1/2] menu screen of BR-DV6000 is set to “LOC+REM”. VTR control will not be available when REMOTE SEL NET is set to “OFF”.
●
Depending on the cache setting of your browser
, the parameters updated in the VTR’
s menu may not be ef
fective immediately
.
●
When changing the password, “ENCODE” users will be fixed with the first 4 characters of the set password and “BROWSE” users will be fixed with “sa-dv” as the password.
Netw
ork remote contr
ol
Contr
olling the BR-D
V6000/SA-D
V6000 via a netw
ork
49
Netw
ork remote contr
ol
NETW
ORK SETUP pa
g
e
Clicking NETWORK SETUP
on the left of the Streamcorder screen displays the NETWORK SETUP
screen for performing network
related settings. Contact your network administrator for any unclear points concerning network settings.
Caution
If the IP
address is changed in the Streamcorder screen, the unit will automatically jump to the new IP
address. However
, the
screen may not be displayed correctly depending on the environment. In this case, access by specifying the new IP
address using
a browser
. (
☞
operation
7.
on pages 47)
Screen selection
Clicking the OK icon will confirm the inputted setting.
Item
Address Setup IP Address Subnet Mask Default Gateway Host Name Domain Name DNS Server FTP Client FTP
Server
Account AD-HOC MODE WLAN Channel ESS-ID WEP WEP
Key
LEAP LEAP
Server
Accout
Setting
MANUAL DHCP IBSS AHDM OFF 1 CH : 10 CH : 14 CH 64 Bit 128 Bit OFF ON OFF
Description
F
actor
y setting
The address setting mode can be selected.
MANUAL
MANUAL
:
Select for MANUAL mode.
DHCP
:
Select for DHCP
mode.
The IP address can be set.
192.168.100.101
The subnet mask can be set.
255.255.255.000
The gateway address can be set.
192.168.100.254
The host name can be set. (Max: 63 alphanumerical characters)
none
The domain name can be entered. (Max: 63 alphanumerical characters)
none*
The address of the domain name system server can be set.
0.0.0.0*
When SETUP is selected, the FTP CLIENT SETUP screen appears. ( ☞
page 50)
When selecting Change, settings can be made in the FTP
Server
Account Setup screen. (
☞
page 51)
The AD-HOC mode can be set.
OFF
●
WLAN Channel can be set.
10 CH
●
Select the region of use using the COUNTR
Y
setting.
USA: U.S., EU: Europe, FRN: France, SPN: Spain, JPN: Japan
When selecting Change, settings can be made in the ESS-ID Setup screen. (Max: 32 alphanumerical characters) (
☞
page 51)
WEP is set.
OFF
When selecting Change, settings can be made in the WEP
Key Setup
screen. (
☞
page 51)
When set to ON, LEAP
Server
Account can be set.
OFF
When Change is selected, settings can be made in the LEAP
Server
Account Setup screen. (
☞
page 51)
*
At the present, there will be influence on the operation when setting the Domain Name or DNS Server
.