Jura Capresso IMPRESSA X9 - Manual (Page 12)

12
14.6 Programming the language
COFFEE READY
Ⅲ Press P (Fig. 5/E) until you hear an acoustic signal.
HARDNESS
Ⅲ Press the «+» or «–» key until LANGUAGE appears on the
display.
LANGUAGE
GERMAN
Ⅲ Press P again (Fig. 5/E) to activate the LANGUAGE program-
ming step.
LANGUAGE
GERMAN
Ⅲ Press the «+» or «–» key to select the required language.
LANGUAGE
ENGLISH
Ⅲ Press P to confirm your setting (Fig. 5/E).
CONFIRMED
LANGUAGE
ENGLISH
Ⅲ Press the «+» or «–» key to select the next program step or press
EXIT (Fig. 5/K) to leave programming mode.
Ⅲ Press EXIT (Fig. 5/K) again to leave programming mode.
14.7 Setting up the display
14.7.1 Unit of measurement (ml/oz)
This setting allows you to select a unit of measurement
(ml or oz).
COFFEE READY
Ⅲ Press P (Fig. 5/E) until you hear an acoustic signal.
HARDNESS
Ⅲ Press the «+» or «–» key until DISPLAY appears on the display.
SETTINGS
Ⅲ Press P again (Fig. 5/E) to activate the DISPLAY programming
step.
SETTINGS
UNIT
ML
Ⅲ Press P again (Fig. 5/E) to activate the selected unit of measure-
ment.
SETTINGS
UNIT
ML
Ⅲ Press the «+» or «–» key to select the required unit of measure-
ment.
SETTINGS
UNIT
OZ
Ⅲ Press P to confirm your setting (Fig. 5/E).
CONFIRMED
SETTINGS
UNIT
ML
Ⅲ Press the EXIT key (Fig. 5/K) for with «+» or «–» key to select
the next program step.
Ⅲ Press EXIT (Fig. 5/K) again to leave programming mode.
14.7.2 Time format
This setting allows you to select the time format (24 hours or
AM/PM).
COFFEE READY
Ⅲ Press P (Fig. 5/E) until you hear an acoustic signal.
HARDNESS
Ⅲ Press the «+» or «–» key until DISPLAY appears on the display.
SETTINGS
Ⅲ Press P again (Fig. 5/E) to activate the DISPLAY programming
step.
SETTINGS
UNIT
ML
Ⅲ Press the «+» or «–» key until TIME FORMAT appears on the
graphics display.
SETTINGS
TIME
FORMAT
Ⅲ Press P again (Fig. 5/E) to activate TIME FORMAT.
SETTINGS
FORMAT
24 HRS
Ⅲ Press the «+» or «–» key to select the required time format.
SETTINGS
FORMAT
AM/PM
Ⅲ Press P to confirm your setting (Fig. 5/E).
CONFIRMED
SETTINGS
TIME
FORMAT
Ⅲ Press the EXIT key (Fig. 5/K) for with «+» or «–» key to select
the next program step.
Ⅲ Press EXIT (Fig. 5/K) again to leave programming mode.
14.8 Information
With the IMPRESSA X9 you can check each coffee you
made. You can also check the number of cleaning cycles,
decalcifying cycles and Claris filter replacements you per-
formed.
COFFEE READY
Ⅲ Press P (Fig. 5/E) until you hear an acoustic signal.
HARDNESS
Ⅲ Press the «+» or «–» key until INFORMATION appears on the
display.