Juniper Networks EX4200 - Manual (Page 135)

To add a switch to an existing preprovisioned Virtual Chassis configuration using the
autoprovisioning feature:
1. Power on the new member switch.
2. Confirm that the new member switch is now included in the Virtual Chassis
configuration by checking the front-panel display for the member ID. It should
display a member ID in the range from 0 through 9 because there was already
at least one member of the Virtual Chassis configuration. The member ID is
automatically assigned to the new member switch's serial number in the
configuration file.
Related Topics ■ Example: Expanding a Virtual Chassis Configuration in a Single Wiring Closet
■ Example: Setting Up a Multimember Virtual Chassis Access Switch with a Default
Configuration
■ Example: Configuring a Virtual Chassis Interconnected Across Multiple Wiring
Closets
■ Example: Configuring a Virtual Chassis Using a Preprovisioned Configuration
File
■ Example: Configuring Automatic Software Update on Virtual Chassis Member
Switches
■ Monitoring Virtual Chassis Configuration Status and Statistics
■ Replacing a Member Switch of a Virtual Chassis Configuration (CLI Procedure)
on page 182
■ Reverting to the Default Factory Configuration for the EX Series Switch
Adding a New Switch to an Existing Preprovisioned Virtual Chassis Configuration Using Autoprovisioning ■ 109
Chapter 8: Planning the Virtual Chassis