JVC CA-MXJ787V - Manual (Page 27)

22
English
To record on both sides — Reverse Mode
Press REVERSE MODE a so that the Reverse Mode
indicator lights up as —
• When using the Reverse Mode for recording, start recording in
the forward ( 3) direction first. Otherwise, recording will stop
when recording is done only on one side (reverse) of the tape.
To cancel Reverse Mode, press the button again so that the
Reverse Mode indicator lights up as —
To record an AM station — Beat Cut
While recording an AM broadcast, beats may be heard (which are
never heard when listening to the broadcast without recording it).
If this occurs, press PROGRAM/RANDOM v
repeatedly, while recording, until the beats are reduced.
• Each time you press the button, the display changes
to show the following:
REVERSE
MODE
PROGRAM
/ RANDOM
CUT1 CUT2 CUT3
CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD,
or according to the order you have made for Program play.
1
Put a recordable cassette into deck B.
2
Place a disc correctly on the circle of the disc tray,
with its label side up.
3
Press one of the disc number buttons
(CD 1 to CD 3) r, 1 to select the
disc, then
7 z, +.
4
Press CD REC START f.
“CD REC” appears, and the indicator
lights up on the display.
Deck B starts recording and the CD player starts playing.
When the recording is done, “CD REC FINISHED” appears on
the display, and the CD player and deck B stop.
To stop during CD Direct Recording, press 7 z, +.
To remove the cassette, press EJECT 0 o for deck B.
To record on both sides — Reverse Mode
Press REVERSE MODE a so that the Reverse Mode indicator
lights up as —
• When using the Reverse Mode for CD Direct Recording, start
recording in the forward ( 3) direction first. When the tape reaches
its end while recording a song in the forward direction ( 3), the
last song will be recorded at the beginning of the reverse side
(
2).
If you start recording on the reverse side ( 2), recording will stop
when recording is done only on one side (reverse) of the tape.
To cancel Reverse Mode, press the button again so that the
Reverse Mode indicator lights up as —
CD 1
CD 2
CD 3
CD REC START
Dubbing Tapes
It is preferable that the tape type (type I or II) you record from be
the same as the tape type you record onto when dubbing tapes.
1
Press TAPE 2 3 7, =, then 7 z, +.
2
Put the source cassette in deck A, and a recordable
cassette into deck B.
• Put the cassettes in both decks so that the tapes will run in the
forward ( 3) direction.
3
Press DUBBING d.
Dubbing starts.
To stop during dubbing, press 7 z, +.
To remove the cassette, press 0 w EJECT for deck A and
EJECT 0 o for deck B.
To record on both sides — Reverse Mode
Press REVERSE MODE a so that the Reverse Mode indicator
lights up as —
To cancel Reverse Mode, press the button again so that the
Reverse Mode indicator lights up as —
DUBBING
Continued
EN21-25;MX-J777V/PM6 7/8/99, 9:14 AM 22