English, Adjusting the volume, Listening only with headphones – JVC RX-5022VSL User Manual

Page 48: Selecting different sources for picture and sound, On the front panel

Advertising
background image

9

English

Selecting different sources for picture and
sound

You can watch picture from a video component while listening to
sound from another component.

Press one of the audio source selecting buttons (CD, TAPE/CDR,
FM/AM), while viewing the picture from a video component such as
the VCR or DVD player, etc.

Note:

Once you have selected a video source, pictures of the selected
source are sent to the TV until you select another video source.

Adjusting the Volume

On the front panel:

To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it
counterclockwise.

From the remote control:

To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.

CAUTION:

Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.

Note:

The volume level can be adjusted within the range of “0” (minimum) to
“50” (maximum).

Listening Only with Headphones

You must turn off the speakers when you listen with headphones.

1

Connect a pair of headphones to the PHONES jack on the front
panel.

2

Press SPEAKERS ON/OFF.
• “HEADPHONE” appears for a while and the H. PHONE

indicator lights up on the display.

This cancels the Surround mode currently selected, and activates
the HEADPHONE mode.

HEADPHONE mode

When using the headphones, following signals are output
regardless of your speaker setting:
— For 2 channel sources, the front left and right channel signals

are output directly from the headphones.

— For multichannel sources, the front left and right, center, and

rear channel signals are down-mixed and then output from the
headphones.
You can enjoy multichannel sound sources using the
headphones.

CAUTION:

Be sure to turn down the volume:
• Before connecting or putting on headphones, as high volume can

damage both the headphones and your hearing.

• Before turning on speakers again, as high volume may output from

the speakers.

TAPE/CDR

CD

DVD

FM/AM

TV SOUND

VCR

On the front panel

From the remote control

DVD

VCR

TV SOUND

CD

TAPE/CDR

SOURCE NAME

FM/AM

MASTER VOLUME

VOLUME

L

H.PHONE

ANALOG

R

The H. PHONE indicator lights up.

EN08-17.RX-5020/5022V[C]_f

01.12.27, 10:11 AM

9

Advertising
This manual is related to the following products: