SonicWALL Internet Security Appliances - Manual (Page 34)

Configuring the Network Mode on the SonicWALL Page 35
Configuring LAN Network Settings
8. The Fill in information about your LAN page allows the configuration of the SonicWALL LAN IP
Address and the LAN Subnet Mask. The SonicWALL LAN IP Address is the private IP address
assigned to the LAN port of the SonicWALL. The LAN Subnet Mask defines the range of IP
addresses on the LAN. The default values provided by the SonicWALL work for most networks.
If you do not use the default settings, enter the SonicWALL LAN settings and click Next to
continue.
Configuring the SonicWALL DHCP Server
9. The Optional-SonicWALL DHCP Server page configures the SonicWALL DHCP Server. If enabled,
the SonicWALL automatically configures the IP settings of computers on the LAN. To enable the
DHCP server, select the Enable DHCP Server check box, and specify the range of IP addresses
that are assigned to computers on the LAN.
If the Enable DHCP Server check box is not selected, the DHCP Server is disabled. Click Next to
continue.