Smart Technologies SMART Board Software 9.5 - Manual (Page 30)

26 Installing Service Packs
You can add the quiet switch /qn to the default command line installation above to install the
service pack silently.
1. Click Start > Run and type CMD.
A DOS window opens.
2. Type the following command line:
msiexec /p "Path to the .msp\Board95ServicePackSPx.msp" /qn
REINSTALLMODE=omus REINSTALL=ALL
3. Press Enter.
The Service Pack Installation Program
You can also download the Board95ServicePackSPx.exe (where x is the service pack number)
installation program from the SMART website. You can run the program from the website, or you
can download the Board95ServicePackSPx.exe file to your computer or to a network drive.
You can use the following command to perform a default service pack installation:
1. Click Start > Run and type CMD.
A DOS window opens.
2. Type the following command line (including quotation marks):
"Path to .exe\Board95ServicePackSPx.exe"
3. Press Enter.
You can add the silent switch /s to the above command to perform a silent service pack
installation:
1. Click Start > Run and type CMD.
2. A DOS window opens.
3. Type the following command line (including quotation marks):
"Path to .exe\Board95ServicePackSPx.exe" /s
4. Press Enter.
NOTES
• You can copy the Board95ServicePackSPx.exe file to any accessible network server and run
the command from that location.
• Don’t use any other options.
• You can’t use a command line to remove a service pack. To remove a service pack, you must
remove SMART Board software, using Windows Control Panel or a command line (see
page 19), and then reinstall the original software.
To perform a silent installation using the installation package
To perform a default installation using the installation program
To perform a silent installation using the installation program