Sanyo VCC-ZM400 - Manual (Page 65)

SPECIFICATIONS
Pickup device : 1/4"
Effective pixels : 768 (H) x 494 (V)
Horizontal resolution : Over 520 TV lines
Lens : x22 zoom lens, f=3.6 – 79.2mm (F1.6 – 3.8)
Electronic zoom and gearing
Zoom speed setting possible
Electronic zoom : 16 power (combined with optic zoom gives
352 power max)
Max zoom magnification setting possible
Vertical resolution ON/OFF setting
Autofocus : AUTO/MANUAL
AF area setting possible (3 step)
Iris control : AUTO/MANUAL, 1/2 EV steps
Synchronization method : Internal synchronization/Line lock,
V phase adjustment possible
Lowest image illumination : 1.2 lx (F1.6, AGC gain at maximum, COLOR
mode)
0.06 lx (F1.6, B/W mode)
0.04 lx (F1.6, x32 electronic sensitivity
increased, COLOR mode)
0.002 lx (F1.6, x32 SENSE UP, B/W mode)
S/N : Over 48dB
Backlight compensation : Multi-spot evaluative metering
5 spot centerweighted average metering
48 multi-spot metering
Day/Night : AUTO / COLOR / B/W settings available
Electronic shutter : •
Fast shutter speed mode (SHORT);
1/60, 1/100, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
• Slow shutter speed mode (LONG);
x1, x2, x4, x8, x16, x32
Electronic sensitivity
boosting
: AUTO/OFF, works with auto iris
Up to x32 max setting possible
White balance : ATW/AWC/MWB
AGC gain : OFF/–6/ ± 0/+6/+9/+12/+15dB
Motion detector : ON/OFF, ON allows setting of detection
patterns on a 48 zone screen for 6 motion
settings (size, masking, sensitivity, zoom,
interval, alarm sign)
Privacy masking : ON/OFF, max of 4 masked locations
Password lock possible
Alarm input/output
(back panel control
terminals)
: Alarm input: 1 (for external alarm switch)
Alarm output: 1 (for sending a signal to the
system controller or an alarm detection
device such as a buzzer)
Mirror image effect : Horizontally (H), vertically (V), horizontally
and vertically (HV)
Camera ID : ON/OFF, 16 characters
View settings : 9 (0 – 8) screen files can be established, and
each file can set 7 capturing characteristics
such as iris
Communications : Coaxial control, RS-485
Operational
temperature/humidity
: –10 – +50° C/below 90% RH
Power source : 24 V AC, 60 Hz/12 – 15 V DC
Power consumption : 4.5 W
Weight : 380 g
SERVICE
This camera is a precision instruments and if treated with care,
will provide years of satisfactory performance. However, in the
event of a problem, the owner is advised not to attempt to make
repairs or open the cabinet. Servicing should always be referred to
your dealer or Sanyo Authorized Service Centre.
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
64