Sanyo VCC-ZM300 - Manual (Page 20)

LENS SETTING (LENS)
5 Use the cursor button (j or l) to move the cursor to
SET for AREA, and press the SET button.
The AREA SETTING screen for AREA 2 (initial setting) will
appear to allow setting of focus target area.
6 Use the cursor button (d or c) to select the focus target
area. (Ex: 3)
The focus target area will become narrow.
Available settings: 1/full screen, 2/center of screen,
3/smaller center
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
5
FOCUS SETTING
LIMIT NEAR 3M
SENSITIVITY LOW
AREA SET ‚
PRESET OFF
MENU BACK
AREA SETTING
AREA 2
PRESET OFF
MENU BACK
6
AREA SETTING
AREA 3
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
En
g
lis
h
19