Sprint Nextel AIRCARD 402 - Manual (Page 19)

Inst
alli
ng the
Sof
tware
Section 2B. Installing the Software and Activating Your Device 13
Installing the Software on a Mac Computer
System Requirements
The AirCard 402 device works with any MacBook™ Pro or PowerBook ® G4 computer
running Mac OS X version 10.4.11 or newer.
To check your version, from the Apple menu ( ) choose About This Mac . If your version is
earlier than 10.4.11, then you must upgrade to version 10.4.11 or newer; contact an Apple
reseller, an Apple retail store, or visit
www.apple.com/store .
To install and run the device and accompanying Sprint SmartView software on a Mac
computer, you will need an empty PC Card or ExpressCard slot.
Installing the Software and Drivers
1. Ensure you are in the Sprint Mobile Broadband coverage area (not roaming).
2. If your computer has an AirPort ® , AirPort Extreme ® , AirPort Express ® , or Bluetooth
adapter, turn it off. (For instructions, see your computer’s user guide.)
Note As part of the installation process you will need to restart your computer; save any
open documents.