Sun Lawn EM-1 - Manual (Page 14)

Owner’s Manual — Sunlawn EM--1
12
6. Now check the adjustment using the small 0.05mm gauge (silver
strip) supplied with the EM-1 (or any 0.05mm feeler gauge). If the
gauge is held by the cylinder blades but the cylinder and cutting bar
are not touching then the adjustment is correct.
7. The blades may also be tested by inserting a piece of paper
vertically into the blades while turning them by hand.
Battery 2 x 12V / 7.2Ah
Motor Drive 24V, 6A, 140W
Charger Input: AC 100 – 240V 50 / 60 Hz 1.5A
Output: 24V _ _ _ _ 1500 mA
UL listed
Mower Cutting width: 40 cm
Weight with battery: 35.2 lb
Cutting height rough (from floor): .4 to 2.2 inches
CE certified: Declaration of Conformity (
November 30, 2005)
EMC Order No. MT-E0511395-1
Machinery Order No. MT-S0511320-1
TECHNICAL DATA
WARNING
Be careful of injury — handle the blades
carefully to avoid cutting yourself. Wear
appropriate gloves or hand protection.
!