Spalding 21166904 - Manual (Page 23)

23 10/04 P/N 21166904
Valve
Valve
Trigger released,
locking elevator
Trigger squeezed,
unlocking elevator
If the elevator is still difficult
to operate, verify that the
valves located on the strut
are fully depressed when the
trigger is activated.
NOTE: two people are
required for this procedure.
Adjust exposed cable length,
located next to the trigger
(See Step 19) by using the
jam hex nuts on the cable
end. Slide outer shroud to
exposed valves. The valves
must be fully depressed so
elevator can be adjusted
smoothly and fully extended
to lock the elevator.
Jam Hex Nuts