Specifications – Sanyo HT27547 User Manual
Page 7
7
SPECIFICATIONS
SCREEN SIZE:
27" Flat Screen
SCANNING FORMAT:
480i (All Signals are
Converted to 480i)
RF ANTENNA INPUT:
75 ohm—Digital/Analog
POWER REQUIREMENT:
Source: AC 120V, 60Hz
POWER CONSUMPTION:
85 Watts (Average)
SOUND:
Two Speakers, size: 6 x 12 cm
AMPLIFIER:
Built-in with 1.0 W/ch
JACKS / CONNECTORS:
VIDEO1
Front Composite Video and
Audio R/L
VIDEO2
Rear Composite Video with
Audio R/L Input
S-Video
VIDEO2
Component (Y / Pb / Pr) with
shared Audio R/L Input
Digital Audio Output:
Dolby
®
Digital (Optical Cable)
Analog Audio Output:
Fixed Audio R/L
SIZE AND WEIGHT (APPROXIMATELY):
Horizontal Dim. (Width):
30.3 in. (770mm)
Vertical Dim. (Height):
23.0 in. (585mm)
Depth Dim. (Thickness):
19.5 in. (496mm)
Weight:
103.5 (lbs.) 47.0 (Kg)
Specifications are subject to change without notice.
CAUTION: FCC Regulations state that improper modifications or un-
authorized changes to this unit may void the user’s authority
to operate the unit.
This symbol on the nameplate means the product is
Listed by Underwriters’ Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
“As an E
NERGY
S
TAR
® Partner, Sanyo
Manufacturing Corporation has determined
that this product meets the E
NERGY
S
TAR
®
guidelines for energy efficiency.”
with a double “Z” is a registered trademark of
Sanyo Manufacturing Corporation.
Trademarks Information:
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
MediaStack-ATSC the DTV software embedded in this product
copyright (c) 2004 by Zentek Technology, Inc. All rights reserved.
R
®
®