Kyocera KM-3650w - Manual (Page 51)

Chapter 3 Error Correction 3-18
3. 1. 3. 5 In Power Save Mode
When “In Power Save Mode.” is displayed, KM-3650w is in the Power Save Mode to save the
power consumption.
(1) The Power Save Mode works automatically if you make no operation for the time
specified in advance.
The machine ceases controlling the temperature of Fuser Unit completely to save the
power consumption. (Power Save Mode can save more power than Warm Sleep Mode.)
(2) The Power Save Mode will be cancelled by the following 3 ways.
• Making a print from the network
• Inserting an original to the scanner
• Pressing any key on the Operation Panel
Note that it takes some minutes to recover from the Power Save Mode as the
temperature of Fuser Unit must be raised again.
(Print starts when the machine gets ready.)
Reference