Konica Minolta NON-CONTACT 3D DIGITIZER VIVID 9i - Manual (Page 54)

52
Specifications
The above specifications are subject to change without prior notice.
Model Name Non-contact 3D digitizer VIVID 9i/VI-9i
Measurement Method Triangulation, light block method
AF Image surface AF (contrast method), Active AF
Light-Receiving lens (Inter-
changeable)
TELE : Focal distance f=25 mm
MIDDLE: Focal distance f=14 mm
WIDE
: Focal distance f=8 mm
Object Distance Range 0.6 to 2.5 m
Scan Range 0.6 to 1.0 m (In Standard mode), 0.5 to 2.5 m (In Extended mode)
Laser Scan Method Galvano mirror
Laser Class Class 2 (IEC60825-1), Class 1 (FDA), Max. 30 mW, 690 nm
X Direction Input Range
(In Extended mode) 93 to 463 mm (TELE), 165 to 823 mm (MIDDLE),
299 to 1495 mm (WIDE)
Y Direction Input Range
(In Extended mode)
69 to 347 mm (TELE), 124 to 618 mm (MIDDLE),
224 to 1121 mm (WIDE)
Z Direction Input Range
(In Extended mode)
26 to 680 mm (TELE), 42 to 1100 mm (MIDDLE),
66 to 1750 mm (WIDE mode)
Accuracy TELE XYZ: ±0.05 mm/ ±0.10 mm
MIDDLE XYZ: ±0.10 mm/ ±0.20 mm
WIDE XYZ: ±0.20 mm/ ±0.40 mm
(Conditions:Distance 0.6 m/ 1.0 m, KONICA MINOLTA SENSING’s standard 3D
chart, KONICA MINOLTA SENSING’s processing software, temperature 20ºC, rela-
tive humidity 65% or less)
Precision (Z, σ) TELE 0.008 mm/ ±0.024 mm
MIDDLE 0.016 mm/ ±0.048 mm
WIDE 0.032 mm/ ±0.096 mm
(Conditions: Distance 0.6 m/ 1.0 m, KONICA MINOLTA SENSING’s standard 2D
chart, KONICA MINOLTA SENSING’s processing software, temperature 20°C, rel-
ative humidity 65% or less)
Input Time (per scan) 2.5 sec.
Transfer Time to Host Com-
puter
Approx. 1.5 sec.
Ambient Lighting Condition Office environment, 500 lx or less
Imaging Element 3D data : 1/3-inch frame transfer CCD (340,000 pixels)
Color data : Common with 3D data (color separation by rotary filter)
Number of Output Pixels 3D data : 640 × 480 (640 x 460 in the HIGH QUALITY mode)
Color data : 640 × 480
Output Format 3D data: Konica Minolta format, & (STL, DXF, OBJ, ASCII points, VRML)
(Converted to 3D data by the Polygon Editing Tool Software / standard accessory)
Color data : RGB 24-bit raster scan data
Data File Size Total 3D and color data capacity: 3.6 MB per data
Viewfinder 5.7-inch LCD (320 × 240 picture elements)
* There may be rare cases in which the point that is normally lit or unlit may break up
(dot break up); however, this will not have any influence on the scanning data.
Output Interface SCSI II (DMA synchronous transfer)
Power Commercial AC power, 100-240 V (50-60Hz), rated current 0.6 A (at 100 V AC)
Dimensions 221 (W) × 412 (H) × 282 (D) mm
Mass Approx. 15 kg (with lens attached)
Temperature / Humidity Operating environment: 10 to 40°C (50°F to 104°F); 65% RH or less/no condensa-
tion; Installation category: II; Pollution degree: 2; Maximum altitude: 2000 m
Storage Temperature Range 0 to 40°C, 85% or less (at 35°C)/no condensation
Vivid910-hard-E.book Page 52 Monday, October 18, 2004 3:11 PM