Krell Industries DVD Player - Manual (Page 23)

Krell Showcase DVD 19
4. Connect the balanced (27) or single-ended (28) analog audio
outputs to your loudspeakers.
5. Connect the optics digital audio (33) or coaxial audio (34) digital
output to your loudspeakers.
DTS audio playback is available only from the digital outputs.
6. Plug the AC power cord into the IEC connector (39) on the back
panel, then plug the AC power cord into the wall socket. The red
stand-by LED (3) on the front panel illuminates.
When powering up any system, always turn amplifiers on last. When
powering down, always turn amplifiers off first.
Showcase DVD Connections to Your System, continued
Note
Note