Listen Technologies Satellite Radio - Manual (Page 45)

39
LR-200-072
On/Off and Volume Control Dial
3.5 mm Output Jack: Connect a Listen earphone(s) here.
72
STAND ARD RECEIVER
72
STAND ARD RECEIVER
72
STAND ARD RECEIVER
+
+
- -
+
+
-
-
72
Alkaline
Battery Select
Channel Select
NiMH
LR-200-072 Setup Instructions
Remove the product
Remove outer packaging and plastic cover. Inspect for physical damage. If damage is apparent,
please contact the dealer from which the product was purchased or Listen Technologies
Corporation technical support for assistance (refer to page 55 for contact information).
Open the front access door
If locked, use a small screwdriver to unlock the door locks on both sides of the unit. To unlock
the door, rotate the lock ¼ turn counterclockwise. Grip the two tabs with your thumb and
index finger and pull the door downward. DO NOT place batteries in the unit at this time.
Select Battery Type
WARNING: Do not place the BATTERY switch in the NiMH position if you are not using
Nickel Metal Hydride Batteries. The NiMH position will attempt to charge
any batteries in the unit, even if they are not the proper type. Charging
non-Nickel Metal Hydride (NiMH) batteries will result in physical harm,
destruction of property and/or fire.
CAUTION: If you are using any battery type other than rechargeable Nickel Metal
Hydride (NiMH) batteries, make sure the BATTERY selection switch is in the
alkaline position.
72 72
72
STAND ARD RECEIVER
Alkaline
Battery Select
Channel Select
NiMH
Alkaline
Battery Select
Channel Select
NiMH
1
2
3
BATTER
Y SELEC
T
Two types of batteries may be used: The unit is shipped with the switch in the Alkaline position.
Use a pen or small screwdriver to select the battery type.
Battery Select Switch