Initial configuration – Logical Solutions Secure Console Servers SCS-R User Manual

Page 36

Advertising
background image

Initial Configuration

SCS160 / SCS320 / SCS480

Page 36

www.thinklogical.com

SCS160R / SCS320R

As soon as you change a digit, an asterisk (*) will appear to the right on the top line,

indicating that a parameter has changed.

Figure 4.5 SCS Front Panel Display, Asterisk indicating a change

When you have the complete parameter value as it should be, press the ENTER

button to complete the entry.

The display will show the following:

Figure 4.6 SCS Front Panel Display, after editing the IP Address

Your new value will be stored when you are finished setting all the Network param-

eters.

Net Mask

Press the Down Arrow once to advance to the Net Mask parameter.

Figure 4.7 SCS Front Panel Display, showing the current Net Mask

Press the ENTER button to change the Net Mask parameter. The current Net

Mask setting will be displayed, with a cursor under the first digit. The factory default is
255.0.0.0.

Press the Left or Right arrow button to move the cursor to the first digit to be

changed. To change a digit, use the Up or Down arrows to change the number.

Edit IP Address
192.168.075.239

*

IP Address
192.168.075.239

Net Mask
255.000.000.000

Advertising
This manual is related to the following products: