Lopi BLACK 99300496 - Manual (Page 2)

Hearthview (864) Wilmington Face
Black 99300496 Carbon Patina 95800251
Page 2 of 6 17601408 - 5/13/13 © Travis Industries, Inc.
Special Instructions for 864HO Fireplaces
The Wilmington face requires the outer grill deflectors to be removed to allow for installation of the face mounting
brackets. Once the brackets are installed, replace the deflectors. See the instructions below.
Remove the outer deflector on both sides
(use needle-nose pliers if necessary).
These tabs bend down
to allow for removal.
Re-attach the deflectors once the
mounting brackets are in place. Bend the
tabs down, making sure the deflectors are
secure and flat.
Special Instructions for 864ST Fireplaces
The Wilmington face requires removal of the center deflector prior to installing the face.
NOTE: This deflector must be replaced to its original position if a different face or grill is used.
Remove the center deflector (use needle-
nose pliers if necessary).
These tabs bend down
to allow for removal.
Re-attach the deflector to the
louver. Bend the tabs as
shown, making sure the
deflector is secure and flat.
WARNING : The deflector must be
replaced in its original position if a
different face or grill is used.