Lexicon 284 - Manual (Page 12)

Lexicon
8
Stereo Loop Examples
3. Connect the mono (or right) output of the effect to the right return of the
Signature 284.
4. Set the guitar, preamp and the Left Volume control of the Signature 284 for
your loudest playing.
5. Turn up the effect input control to optimum level.
6. Set the Right Volume control of the Signature 284 to the same position as the
Left Volume. (No sound will be heard from the right side yet.)
7. Turn up the effect output control until the left level matches the right. (The
effects unit is now properly set.)
8. Connect the second channel of the effect to left side of the loop.
Rear Panel Connections
Inserting a Stereo In-Stereo Out processor
in the Signature 284 Effects Loop
Inserting a Mono In-Stereo Out processor
in the Signature 284 Effects Loop
Stereo Effects