Linn Stereo Pre-Amplifier - Manual (Page 16)

14
User Options
This section explains how you can configure certain features of the KLIMAX KONTROL to suit your
requirements.
Note:
The unit must be in standby mode.
To enter user options mode:
■ Hold STANDBY until the front panel display shows SLEEP DISPLAY.
To cycle through the user options:
■
Repeatedly press or hold SOURCE +/SOURCE - on the front panel or BAL R / BAL L on the handset.
To adjust the setting of an option:
■
Repeatedly press VOLUME +/VOLUME -.
To store settings and exit user options mode:
■
Press STANDBY.
The available user options are detailed in the following table:
Defaults are shown in bold.
User Option Description Possible settings
SLEEP DISPLAY The display on the front panel when the unit is in VOLUME, LOGO, SOURCE,
sleep mode. NOTHING
SLEEP TIME The time between the audio signal ceasing and the 2s, 5s, 10s, 20s, NEVER
unit entering sleep mode.
INPUT 1 Signal type for input 1. BALANCED, UNBALANCED
STARTUP SOURCE Source the unit is in when brought out of standby. INPUT 1, LAST SOURCE,
INPUTs 2-5
STARTUP VOLUME Volume level the unit is in when brought out of DEFAULT, LAST SOURCE
standby.
DEFAULT VOLUME Volume level the unit selects when brought out of 50/(-40dB), 0/(- ) to
standby if STARTUP VOLUME (above) is set to DEFAULT. 100/(+10dB)
∞