Lennox Hearth Ladera-BK User Manual

Dr af t, Ladera™ installation and operation instructions, Models

Advertising
background image

EPA Wood-Burning Fireplace

P/N 506023-03 REV. A 11/2008

Ladera-BK

Ladera-BN

MODELS

Ladera™

INSTALLATION AND

OPERATION INSTRUCTIONS

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

WARNINGS

Hot! Do not touch! The glass and

surfaces of this appliance will be hot

during operation and will retain heat

for a while after shutting off the appli-

ance. Severe burns may result.

Carefully supervise children in the

same room as appliance.

WARNINGS

• The fireplace cannot be operated without a

door.

• The fireplace is equipped with a blower, electri-

cal connection must be made prior to fireplace

installation

• Important! To assure proper alignment of glass

doors: Install this fireplace in a square and

plumb condition, using shims as necessary at

sides and/or bottom.

• Install the fireplace only as described in these

instructions.

PILADERA REV. 1 NOV 2008

This installation manual will enable you to obtain a safe, efficient and

dependable installation of your fireplace system. Please read and

understand these instructions before beginning your installation.

Do not alter or modify the fireplace or its components under any circum-

stances. Any modification or alteration of the fireplace system, including

but not limited to the fireplace, chimney components and accessories,

may void the warranty, listings and approvals of this system and could

result in an unsafe and potentially dangerous installation.

Lennox Hearth Products wood-burning fireplaces are designed for use

as a supplemental heater. They are not intended for continuous use

as a primary heat source.

TM

DR

AF

T

11

/13

/08

(3)

Listed to standards:
ULC-S610 and UL-127
Report # 3151759

Advertising