Loewe ViewVision DR+ - Manual (Page 43)

43 -
Timer Recording
This recorder can be programmed to record up to seven programs within one
month. For programmed recordings the timer must be informed which signal
sources (TV stations or from AV devices) are to be recorded and the respective
start and stop time.
Switch on the recorder. Insert a rewritable disc for DVD recordings.
Call the Timer Record menu.
OK END Enter Close Timer Record List REC-MENU
Timer Record SQ 80H 9M Free
Media PR Date
HDD 31
S23 K1 Duration : 105 M
StartTime EndTime Repeat
VPS/
PDC
8/12 Fr 20:15 22:00 Once Off
Media Select the memory medium for the recording.
PR Select the stations or an external input.
Date Select the data up to one month in advance.
Start time Defines the start time for the recording.
End time Defines the end of the recording.
Repeat Select repetition (once, daily (Mo-Fr), weekly).
PDC The VPS/PDC system adapts the recording time automatically
to changes in the program start time for recordings via the
integrated tuner. Set the VPS/PDC time and the date of the
program you want to record. You will find these in your TV
guide or in the teletext.
Enter the necessary information for your timer recording(s).
3
4 Move the cursor to the previous / next column.
5 6 Edit the setting at the current cursor position.
OK saves timer data.
Exit Timer Record menu without saving.
Call Timer Record List menu.
Switch recorder to standby.
End recording.
A confirmation message is displayed.
Confirm with OK.
➠ The recorder must be in standby mode for timer recording to start automatically.
➠ Please note that not every station operates with VPS/PDC.
➠ The starting time for the recording must be at least 3 minutes into the future.
The recorder switches on about  minutes before the programmed time and
runs up to about  minutes after the programmed time.
➠ The current time and the current date must be set in the recorder (page 0).
➠ The energy saving function must be switched off (page 1).
➠ Select the audio channel for two-language TV recordings in the “TV Rec
Audio” menu (page 5).
➠ In standby mode the Timer symbol lights up in the display window when a
timer recording is programmed (page 4).
Timer recordings with the ShowView®
system
Programming timer recordings with this system is child‘s play. Most television
schedule publications include the ShowView code numbers along with the infor-
mation about the programmes. So when you want to make a timer recording of a
programme, you only need to key in the appropriate ShowView code number. The
date, start time, end time and station are set automatically. You only need to set
the recording quality and specify whether it is to be a one-off or repeated record-
ing. You can save up to seven timer programmes on the recorder.
Select ShowView menu with the green button.
OK END Enter Delete Close 0-9 Input MENU
ShowView
Number
Enter the ShowView number.
Delete input errors.
Confirm with OK. The Timer Record menu appears.
Check and, if necessary, correct the settings as described under
“Timer Recording” (this page).
Recording