Lotus 890 - Manual (Page 72)

Setting
Options
Description
Power Enabled Lets you enable power
Management Disabled management at all times,
AC Disabled* disable it completely, or
disable it only when you
use an adapter
System Idle
System
Standby
System
Suspend
Hard Disk
Timeout
Screen
Timeout
Low Battery See ’Customizing Power
Save to HDD Management' below
Disabled
Instant On
Disabled
Enabled*
Disabled
1 to 15
minutes;
2 minutes*
Disabled
1 to 15
minutes;
10 minutes*
Disabled
1 to 15
minutes;
5 minutes*
Disabled
1 to 15
minutes;
2 minutes*
The table below lists the power management
options Additional information about power
management follows the table.
Power management options (Setup page 2)
Lets you disable the Idle
mode
Lets you disable or set the
period of inactivity
before the Standby mode
takes effect
Lets you disable or set the
period of inactivity
(following the Standby
period) before the
Suspendmode takes
effect
Lets you disable or set the
period of in activity
before the hard disk drive
turns off
Lets you disable or set the
period of inactivity
before the screen turns off
Enabled See ‘Customizing Power
Disabled* Management’ below
*Default setting
Customizing Your Computer 6-7