LevelOne FPS-3003 - Manual (Page 71)

71
Chapter15 Init Button
The Init button is used for:
1. Print Configuration Report: Press Init button for
exceeding 3 seconds and then the connected HP printer or
PCL supported printer will print out the system configuration.
2. Maintenance: Simultaneously press Init button and turn
on (plug the power adaptor line) the server until USB1 and
USB2 LED indicators simultaneously blink. After that, the
server will do the following tasks:
A. Perform a Factory Default of the MFP server, which will
restore most of the parameters and settings to factory
default values,