LST BC216-1S User Manual

LST Safety

Advertising
background image

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED

BC216-1S_DBL_LST_EN_0804.PDF • PAGE 1

A

Building Safety. Building Security.

Description

• 1-loop version of BC216-1
• For the application in small systems
• Analogue ringbus technology with

unshielded detector cabling

• Menu-driven operation
• Easy commissioning through

AUTO setup

• 32–bit multiprocessor system
• EN 54/VdS-certifi ed

Fire is a permanent threat to life and property. There-

fore, immediate response to a fi re is imperative. The

main objective of fi re detection control panel Series

BC216 is to alarm and to react in time and, conse-

quently, save lives and protect property. For decades

LST have focused their aims to undertaking unrivaled

efforts in order to realize new innovations in the security

area. Research, development and production are loca-

ted within LST premises, thus guaranteeing fl exible and

reliable individual solutions.

Using a 32-bit multiprocessor system, the fi re detection

control panel Series BC216 ensures topmost effi ciency

and speed – prerequisites for saving lives and minimi-

zing damage to property.

The fi re detection control panel BC216–1S is designed

to be used in small systems with only one ADM loop. It

comprises an already completely mounted unit which

includes all basic components that are needed for the

operation of a 1-loop fi re detection control panel.

Slot 1 is by default equipped with a Loop Interface

LIF64-1 for the connection of an ADM loop, slot 2 is

inoperable.

The ADM loop principle offers intelligent analogue ring-

bus technology with bi-directional data transfer. The

loop provides for the software-aided administration of

up to 198 physical address points in a maximum of 128

detector zones. Conventional detectors can be integra-

ted into the ADM loop, if required, by means of conven-

tional zone modules.

Depending on the respective system, a Fire Brigade In-

terface FWI2-1, a Fire Brigade Interface Additional Board

FWZ2-1, an LED-Display Field LAB48 as well as further

optional componentries can be installed in addition.

Easy parameterisation on the control panel‘s display

and operating unit, via a PC keyboard, or by means of

a PC software enables you to tailor the control panel to

your individual requirements.

Advertising