Lindy Carbon Monoxide Alarm - Manual (Page 11)

I
NSTALLATION AND COMMISSIONING I
NSTALLATION AND COMMISSIONING
3
11
Monitoring System
Rack Monitoring System
3.1
3.1.3
3.1.2
PREPARATIONS
Check the supplied items
Transport Damage
Danger
Necessary Accessories
Note
Necessary Tools
– RMS
– Power cable
(for the country in question)
– User‘s Manual
– 6 plug connectors
If the device has visible transport damage, it must not be
taken into operation as its safety is no longer guaranteed.
• Immediately report transport damage to the carrier and the
manufacturer.
• Only use original accessories.
If other sensors are used , pay attention to the specification of the
inouts and outputs (> 3.3.1) !
For 19" installation of the RMS
(> 3.2):
– 3mm flat-blade screwdriver
for fixing the cable
– 4 mounting screws
(with washers and nuts)
for the 19" rack
– A screwdriver suitable for
the mounting screws
– Serial communication cable
(RJ11 connector to 9-pole sub-
D socket)
– 10 cable links, stripped
– CD-ROM