Linn UNIDISK 2.1 PLAYER - Manual (Page 9)

Connecting the UNIDISK 2.1 to a Linn System Controller*
The connections indicated below should be used to connect the UNIDISK 2.1 to the
corresponding connections on a Linn System Controller.
Video connections
The correct video output connections to use are governed by the type of video inputs on
your display device. For example, if you want to use the YPrPb inputs on your display
device, you must connect the YPrPb outputs on your UNIDISK 2.1 to the YPrPb inputs on
the Linn System Controller, and the YPrPb outputs on the Linn System Controller to your
display device’s inputs.
In addition to making the correct connections, certain setup menu and user option
settings must be made. These are detailed in the
Setup Menus and User Options
chapters.
*Excluding the Linn 5103.
4
Connecting
REMOTE
OUT
POWER
OFF
ON
SEE UNDERSIDE FOR SAFETY DETAILS
VOLTAGE RANGE
100-230V ~ 50-60Hz
POWER COMSUMPTION
40W APPROX
OUT RS232 IN
TOSLINK SPDIF
Pr Y Pb Pr Y Pb H V DVI/HDCP
CENTRE
SUB
A B
BAL RIGHT BAL LEFT
COMPOSITE
A
B
IN
FRONT SURR
INTERLACED VIDEO OUTPUTS
WARNING THIS APPARATUS MUST BE EARTHED
PROGRESSIVE VIDEO OUTPUTS
SCART VIDEO OUT ONLY S VIDEO
A
B
R
L
RC5 IN /OUT RS232 IN SPDIF LINE OUTPUT CONNECTORS
English
UNIDISK 2.1 PLAYER
Owner's Manual